Hp Ilo Firmware Download Dl380 G4 Motherboard

21.01.2020/ Comments off

Proliant Dl380 G4 Ilo Firmware
Hp Ilo Firmware Download Dl380 G4 Motherboard Layout
Firmware Download For Android

Unfortunately ILO Firmware1.84 does not support DVD Iso images (not booting). Where can we download newest iLO Firmware for Proliant DL380 G4? I wasted half a day searching but no success:(. Latest HP ILO firmwares. Here you can download the most recent HP iLO. I dont get it my iLO2 wont update to the latest firmware HP ML310 G4.

PrintRate this content

What is Firmware?

Firmware is a software program that is stored in Read-Only Memory (ROM) chip on the system board or on an add-on controller. Firmware is responsible for the behavior of the system when it is first switched on and for passing control of the server to the operating system. When referring to the firmware on the system board of the server, it is called the System ROM or the BIOS. When referring to the firmware on another piece of hardware configured in the server, it is called the Option ROM.

In ProLiant servers, hard drives, Smart Array Controllers, Remote Insight Lights-Out Edition (RILOE), Remote Insight Lights-Out Edition II (RILOE II) and Integrated Lights-Out (iLO) options have firmware that can be updated. For the purposes of this document, it will be referred to collectively as - firmware.

Why to Update Firmware?

It is important to update the firmware (Also called - flashing the ROM) as part of regular server maintenance. In addition, checking for specific firmware updates in between regular updates helps to keep the server performing optimally. Firmware updates are created for, but are not limited to, the following reasons:

To provide critical problem fixes that ensure system stability, such as upgrades that may prevent server unresponsiveness and other issues that could put the system at risk.
To correct product issues, such as ROM or processor functionality.
To improve system performance or make the system more serviceable.

NOTE: Many product issues that result in hardware replacement are preventable or correctable with a firmware update. HPE recommends checking for a firmware update before sending a part back to HPE for replacement. Based on the HPE ProLiant product return rates, approximately 30 to 35 percent of all returned hardware products were functioning properly and only needed a firmware update. Although not all products fall into this category, server downtime and time spent removing, returning, and ultimately replacing hardware may have been avoided if an attempt had been made to flash the firmware during the troubleshooting process.

NOTE: On servers that have add-on options, HPE recommends checking for firmware upgrades for each installed option whenever an update to the System ROM or to another option is performed. This ensures that the system, as a whole, is running the latest updates for each component.

HPE has developed several methods for updating the firmware in a ProLiant server and makes it easy to do so. HPE ISS Engineering emphasizes the importance of regular firmware updates to ensure that a ProLiant server is running optimally, making the system and its data less vulnerable to critical hardware and software events. The different firmware update methods are listed below.

How to Update Firmware?

Once a firmware update is available, from the HPE Business Support Center download pages, the next step is to install the update onto the system. HPE has many methods for updating firmware, making the process easy. The following paragraphs discuss each method and provide information on how to perform the updates.

Currently, there are two different methods for updating firmware on HPE servers and options: the traditional Offline ROM Flash, and the innovative Online ROM Flash.

NOTE: The Online ROM Flash is not currently available for all products. If an Online ROM Flash is unavailable for a particular server or option, an Offline upgrade will need to be performed.

If a server has been deployed more than three months after purchase, upgrade the firmware on the system and also on any options that are installed using the HPE Support Center, rather than the Firmware Maintenance CD that shipped with the server. In addition, it is beneficial to check for firmware updates for any options that may have been in customer stock but are not deployed until later. This ensures that all server components are running the latest firmware versions.

Updating Firmware Using The Offline ROM Flash Method

The Offline ROM Flash, as its name implies, is performed when the server is taken down for regular maintenance. Although the results will be the same, the Offline ROM Flash does not provide the same benefits of the new Online ROM Flash method. In addition, when upgrading remotely, the server administrator can only update one server at a time.There are two methods of performing an Offline ROM Flash.

The server firmware can be updated using a ROMPaq boot Diskette.
1. Download the Server ROMPaq file from the HPE Business Support Center.
2. Run the download file to create the ROMPaq boot Diskette.
Click here for a complete listing of all the available ProLiant Server ROMPaq downloads.
Or by using either the ROM Update Utility or the HPE Smart Update Manager.

NOTE: Beginning with the Firmware Maintenance CD Version 7.50, the HPE Smart Update Manager Utility (HPE SUM) has replaced the HPE ROM Update Utility. All other firmware update methods, including Offline Systems ROMPaq and Online ROM Flash are unaffected and continue to be supported methods of flashing the System ROM.

The HPE Smart Update Manager (HPE SUM) utility enables the user to deploy software and firmware components from a single, easy-to-use graphical user interface. HPE SUM is delivered with HPE Service Pack for ProLiant (SPP) and HPE Integrity firmware bundles. A user can install the HPE System Management Homepage (SMH) as a part of the complete Service Pack for ProLiant (SPP), or they can install the HPE SMH component individually.

Click here to access and view information on Installing HPE SMH Using HPE Smart Update Manager.

A ROMPaq is a floppy-disk based method of upgrade. The firmware is downloaded onto a floppy diskette and then the system is booted to the floppy drive.The ROM Update Utility is located on the Firmware Maintenance CD, or can be downloaded to a USB Drive Key using the HPE Drive Key Boot Utility.

NOTE: Hard Drive components can only be updated using the Offline method.

Updating Firmware Using the Online ROM Flash Method

The Online ROM Flash is an innovative technology developed by HPE that allows the firmware to be upgraded either locally or remotely via a downloadable file called a Smart Component. These Smart Components enable the update to be performed while the server is operational, thereby avoiding costly server downtime.

Benefits of the Online ROM Flash include:

The server does not have to be taken offline to perform the upgrade.
The upgrade process takes less than a minute to complete.
The server can be scheduled for a reboot at a later time to deploy the new firmware after the upgrade process.
The server administrator can remotely perform the upgrade to multiple servers at one time using the ProLiant Remote Deployment Utility, the ProLiant Remote Deployment Console Utility, and other HPE server management technologies, such as HPE Systems Insight Manager (HP SIM).

The Smart Component updates the firmware and configures the system so that the new settings will take effect on the next reboot. This feature allows the update to be performed but gives the administrator control of when the new settings are deployed.

For detailed information on the Online ROM Flash process, Click here to view and read the Online ROM Flash User Guide.

Smart Components for HPE ProLiant servers and storage can be obtained from the HPE Support Center Software and Drivers download pages. Click here to access the HPESC web site and the current downloads that are available.

All Online ROM Flash upgrades are OS dependent. Two types of OS ROM Flash upgrades are available:

Microsoft Windows Operating Systems
Linux Operating Systems

After selecting the HPE ProLiant Server Model Family from the BSC Software and Drivers download site, then select the Operating System that is installed on the system.

Scroll down to the BIOS and Firmware section and select the OS ROM Flash upgrade file.

For more information on how to deploy firmware updates remotely, refer to the following documentation.

Click here to access and view the Insight Manager resources and Information library web site.

The HPE Drive Key Boot Utility

The HPE Drive Key Boot Utility can format an HPE Drive Key so that it can be used as a bootable device. The utility also provides the ability to load the ROM Update Utility on an HPE Drive Key. After the ROM Update Utility has been installed, the Offline ROM Flash Smart Components can be downloaded to the drive key using the ROM Update Utility.

System ROM support is required for the HPE Drive Key Utility.

For additional information on using the HPE Drive Key Boot Utility, check the following documents that are available.

Click here to view and read the 'HPE drive key boot utility for ProLiant servers' User Guide.

Click here to view and read the 'HPE 1GB USB 2.0 Floppy Drive Key' Customer Notice.

NOTE: The HPE Floppy Drive Key has been discontinued and replaced with the HPE Flash Media Kits for newer HPE ProLiant and Integrity Server products.

See the following documentation for information on using the HPE Flash Media Kits.

Click here to view and read the 'HP Flash Media Kits Product Quickspecs'.

Click here to view and read the 'HPE ProLiant and Integrity FirmwareManagement Best Practices ImplementerGuide'.

Using the ROM-Based Setup Utiltiy

After the ProLiant server system ROM has been upgraded to the latest version, you will need to run the ROM-Based Setup Utiliy (RBSU) and configure the system BIOS for the current hardware configuration and components that are installed into the system.

RBSU performs a wide range of configuration activities that may include:

Configuring system devices and installed options
Displaying system information
Selecting the primary boot controller
Configuring online spare memory

Click here to access and read the 'HP ROM-Based Setup UtilityUser Guide'.

Downloading System RomPaq files

Method 1:

Click here to access the 'HP ProLiant Servers - ROM Identification and Firmware Upgrades' page on the HPE Business Support Center.

This page provides download links to the latest System RomPaq for each family of ProLiant servers.

Method 2:

You can also click here to go to the HPE Support Center - Download drivers and software page for ProLiant servers.

Then perform the following steps:

Type theServer model name from the list of servers.
Next, select the Operating System that is installed on the server.
Click, Download from the download categories.
Select and download the System ROM file needed for your server installation.

NOTE: This method will also allow you to obtain the Online ROM Flash Component for Windows that are used with the HPE Management Utilities.

Click here to view and read the 'HPE Service Pack for ProLiant' User Guide.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Provide feedback

Please rate the information on this page to help us improve our content. Thank you!

Was the information on this page helpful?

Please wait while we process your request.

PrintRate this content

Proliant Dl380 G4 Ilo Firmware

Product description

The world's best selling server just got better; the new ProLiant DL380 G4 delivers on its history of design excellence with enterprise-class uptime and manageability, proven two-way Intel Xeon performance, and 2U density for a variety of rack deployments and applications.

Product features

CAUTION: THIS PRODUCT HAS BEEN IDENTIFIED AS A HIGH RISK MODEL FOR NO FAULT FOUND WITH HARD DRIVES AND MEMORY MODULES. PARTS MUST NOT BE ORDERED WITHOUT DOING APPROPRIATE DIAGNOSIS! SEE THE ORDERING LINKS BELOW.

NOTE: For the Standard Features shipped in the 'Factory Integrated Models', please see the 'Configuration Information - Factory Integrated Models' section.

Specification

Processors

Dual-core procesors:

Dual-core Intel Xeon 2.8 GHz/800MHz -2x2M L2 cache processor

Single-core processors:

Intel Xeon Processor 3.8 GHz/800MHz -2MB L2 cache processor
Intel Xeon Processor 3.6 GHz/800MHz -2MB L2 cache processor
Intel Xeon Processor 3.6 GHz/800MHz -1MB L2 cache processor
Intel Xeon Processor 3.4 GHz/800MHz -2MB L2 cache processor
Intel Xeon Processor 3.4 GHz/800MHz -1MB L2 cache processor
Intel Xeon Processor 3.2 GHz/800MHz -2MB L2 cache processor
Intel Xeon Processor 3.2 GHz/800MHz -1MB L2 cache processor
Intel Xeon Processor 3.0 GHz/800MHz -2MB L2 cache processor
Intel Xeon Processor 3.0 GHz/800MHz -2MB L2 cache, Low Voltage processor
Intel Xeon Processor 2.8 GHz/800MHz -2MB L2 cache processor

Cache Memory

1MB Level 2 cache
2MB Level 2 cache
2 x 2MB Level 2 cache (Dual-core Models)

800 MHz Front Side Bus

Upgradeable to dual processing

Intel E7520 Chipset

NOTE: For more information regarding Intel chipsets, please see the following URL:http://www.intel.com/products/server/chipsets/ .

Memory

Click here for memory ordering information .

PC2-3200R 400 MHz DDR2

1GB (2 x 512 MB)

2GB (2 x 1024 MB)

12GB

Embedded NC7782 PCI-X Gigabit Server Adapter

Slot Number	Bus Number	Hot Plug
PCI-X Non Hot-Plug Riser Expansion Slots	1	10	no
	2	6	no
	3	6	no
PCI-X Hot Plug Riser (Optional)	1	10	no
	2	6	yes
	3	6	yes
PCI Express Non-Hot Plug Riser (Optional)	PCI Express x4	0	NA
PCI Express Non-Hot Plug Riser (Optional)	PCI Express x4	0	NA

NOTE: x8 cards are supported but will run at x4 speeds.

NOTE: Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.

NOTE: Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus(starting with the lowest bus).

Smart Array 6i Controller (integrated on system board)

Smart Array P600 with 256 MB battery-backed write cache (SAS Models)

1.44MB Diskette Drive (optional on some models)
24x IDE CD-ROM (IDE DVD-ROM included on High performance models)
None Standard
NOTE: The system can be operated in single channel or dual channel (2/4 split). SCSI configuration kit (364471-B21) is required for dual channel configurations.

1.8 TB	6 x 300GB with standard internal hot plug SCSI drive cage
1.168 TB	8 x 146GB with standard internal hot plug smallform factor SAS drive cage

Serial - One
Pointing Device (Mouse) - One
Graphics - One
Keyboard - One
External SCSI (VHDCI) - One
Network RJ-45 - Three (One for iLO)
USB - Three (one front, two back)

Integrated ATI RAGE XL Video Controller with 8 MB SDRAM Video Memory

Rack (2U), (3.5-inch)

ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft Logo certifications
USB 2.0 Support

Integrated Lights Out (iLO) Standard Management:

Virtual Text Remote Console
Gpt website php script rarbg mirror. Virtual Power Button Control
Dedicated & shared LAN Connectivity
Browser and command line access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell Security
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
Integrated Lights Out Advanced Pack (optional)
Remote Insight Lights-Out Edition ll (optional)

HPE Systems Insight Manager
SmartStart
Redundant ROM
Remote Flash ROM
Management Agent
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array Controllers)
Drive Parameter Tracking (with Smart Array Controllers)
Hot Spare Boot
NOTE: Upon the event of a failed processor or VRM in a multi-processing environment, the system will automatically reboot and use the remaining good processor(s).
Pre-Failure Warranty (covers processors, hard drives and memory)

One Lowline NEMA power cord and One Highline IEC Power cord ships standard

575 Watt, CE Mark Compliant
Optional Hot Plug AC Redundant Power Supply

Five hot plug fans ship standard. Eight hot plug fans total supported internally for full redundancy

NOTE: The additional three fans are available via Redundant Fan Option Kit (PN 293048-B21).

The DL380 quick deploy rail system provides tool-free support for racks with square or round mounting holes(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24 - 36 inches. The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.

NOTE: Cable management arm must be removed to access hot-plug power supplies when the cable management arm is mounted on the right.

DL380 G4 Telco Rack Kit:Support for all two-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions. Click here to see www.racksolutions.com kit offerings .

HPE Factory Express gives you the flexibility to choose from a full menu of factory capabilities all in one manufacturing facility, in one process, with one touch giving user full control and access to HPE's World class manufacturing facility any time. This approach provides user the speed to deploy your IT needs, with total quality assurance, reliability, and predictability to lower total cost of ownership by letting HPE install, rack, and customize software and hardware options for user.

Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives,memory and processors). The warranty is fully supported by HPE Services and a worldwide network of resellers and service providers. In addition 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HPE Care Pack services.

NOTE: Limited warranty includes three year parts, three year labor, three-year next business day on-site support

From Web-based support…to remote diagnostic tools that help decrease downtime…to dedicated onsite service, HPE and its service partners provide 'as-you-need-it' access to ProLiant-specific knowledge and skills no other vendor can match.

Care Pack services provide a range of life cycle support options that let user choose the service levels that meet business requirements, from basic to mission-critical.A full range of HPE Care Pack hardware and software services are available including:

Installation and Start up services helps user get ProLiant servers deployed rapidly
Education courses provide industry leading training for IT professionals
Support services for fast, efficient resolution of hardware and software issues
Extending onsite hardware warranty coverage from next business day to same business day 13 hours, five day or 24 hours, seven days call window with options including four-hour response or six-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to two hours.
System Management, Performance Services and Mission Critical Support Solution

HPE Care Pack Services include HPE branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the enclosure, as well as 22 inches and smaller external monitors and tower UPS options up to 3KVA. 22 inches and smaller external monitors will be covered at the same service level and coverage period as the server. For servers or storage systems installed within a rack, service also covers all HPE qualified rack options installed within the same rack.

NOTE: For more information on HPE Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: Click here to access HPE Care Pack Central.

NOTE: For more information on Software Support offers contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: Click here to access Software Support.

NOTE:Click here to access ProLiant Essentials Foundation Pack.

NOTE: For more information on HPE training offers contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: Click here to access HPE Education services.

NOTE:Click here regarding worldwide limited warranty and technical support.

Software overview

ProLiant Essentials Foundation Pack Software
Description
HPE's new HPE Systems Insight Manager (HP SIM) helps maximize system uptime and performance and reduce system maintenance costs by providing proactive notification of problems before those problems result in unplanned downtime or reduced productivity. HPE SIM are both easy to set up work with the Insight Management Agents, integrated Light-Out and Remote Insight Light-Outs Edition, and Version Control Agents to deliver robust fault, configuration, and asset management as well as remote administration. With HPE SIM customers will also be able to take advantage of role-based security; the ability to manage ProLiant, Integrity, and HP 9000 systems; and plug-ins for storage, client, printer, and power management as well as server rapid deployment, performance management, and workload management. Click here to visit HPE Systems Insight Manager.
SmartStart is a tool that simplifies server setup, providing a rapid way to deploy reliable and consistent server configurations. Click here to access HPE SmartStart CD. SmartStart version supported (minimum): SmartStart 7.10
The Management Agents form the foundation for HP's Intelligent Manageability strategy. They provide direct, browser-based access to in-depth instrumentation built into HPE servers, workstations, desktops, and portables, and send alerts to HPE Systems Insight Manager and other enterprise management applications in case of subsystem or environmental failures. Click here to access Servers Management.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides automatic delivery of software and driver change notifications for ProLiant products. Sign up at Click here to access Get connected with updates from HPE and customize your profile to receive various new alerts as they become available,on a weekly or monthly basis.
ROMPaq, support software,and configuration utilities	The latest software, drivers, and firmware fully optimized and tested for the ProLiant server and options available in SmartStart or downloadable from Software and Drivers download pages Click here to access the Hewlett Packard Enterprise website.
The most advanced configuration analysis, reporting and troubleshooting utilities used by HPE and at fingertips, available in SmartStart.
Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs: Rapid Deployment Pack - an automated solution for multi-server deployment and provisioning, enabling companies to quickly and easily adapt to changing business demands. Workload Management Pack - provides easier management of complex environments, improving overall server utilization and enabling Windows 2000 customers for the first time to confidently deploy multiple applications on a single multi processor ProLiant Server. Integrated Lights-Out Advanced Pack - upgrades the Integrated Lights-Out processor to full virtual presence and control with graphical console and virtual media. Recovery Server Option Pack - entry-level high availability software that will provide reliable protection and increased uptime against server hardware and operating system failures. Performance Management Pack - a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources. NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Click here to access ProLiant Essentials Foundation Pack or the various ProLiant Essentials Value Pack product QuickSpecs for more information.

Operating System Support
Description
Microsoft Windows Server 2000 Microsoft Windows Server 2003 Novell NetWare LINUX (Red Hat, SuSE) SCO UnixWare, OpenServer VMware Virtualization Software NOTE: For more complete and up-to-date information on how to buy server operating systems from HPE, Click here to access the Server Operating Systems and Virtualisation Software website. NOTE:Click here for complete and up-to-date listing of supported OSs and versions. NOTE:Click here for more complete and up-to-date information on Linux support.

Link to product specification

Click here to view the specifications page for the HPE ProLiant DL380 G4 Server .

Link to warranty information

Click here to check the warranty status.

Click here for worldwide limited warranty and technical support available.

Link to QuickSpecs

Information for this Overview is taken from the product QuickSpecs. To access the complete QuickSpecs for this product, select the desired link from the following list:

Click here to view the HPE ProLiant DL380 G4 Server QuickSpecs Worldwide in html format.
Click here to view the HPE ProLiant DL380 G4 Server QuickSpecs Worldwide in pdf format.
Click here to see the QuickSpecs homepage, which provides access to the QuickSpecs for other regions/countries. Download fonts epson ttf.

Disclaimer : One or more of the links above will take you outside the Hewlett-Packard Enterprise web site, HPE does not control and is not responsible for information outside of the HPE web site.